VistaSoft Monitor

설명서
© 2022-2025 DÜRR DENTAL SE

설명서
© 2022-2025 DÜRR DENTAL SE
본 설명서는 2025년 06월 버전 이상의 VistaSoft Monitor에 적용됩니다.
본 설명서는 소프트웨어의 구성 요소입니다. 본 설명서는 소프트웨어의 모델과 장비가 처음 출시된 당시의 기술 수준을 기준으로 제작되었습니다.
본 설명서의 지침과 참고 사항을 준수하지 않을 경우 제조업체와 판매점은 장치와 소프트웨어의 안전한 작동과 안전한 기능에 대해 어떠한 보증이나 책임도 지지 않습니다.
본 설명서의 원본은 독일어 버전입니다. 다른 모든 언어는 원본 안내서의 번역본입니다.
본 설명서에 사용된 경고 표시는 예상되는 인적 및 물적 손상 위험을 가리킵니다.
이 표시는 아래의 경고 기호로 구별되어 있습니다:

일반적인 경고 기호
이 경고 기호는 아래와 같이 구성되어 있음:

위험의 종류 및 원인에 대한 설명
여기는 경고를 무시했을 때 예상되는 결과를 기술하고 있습니다
위험을 방지하려면 이 조치에 따르십시오.
위험
직접적인 중상 또는 사망 위험
경고
중상이나 사망에 이를 수 있는 위험
주의
경상 위험
조심
여러 가지의 물적 손상을 입을 위험
본 기호는 문서와 소프트웨어에서 사용됩니다:
지침 (예) 장치의 경제적인 사용과 관련된 특별한 정보.

전자 송장을 참고하십시오.

제조회사
본 설명서에 수록된 모든 회로도, 절차, 명칭, 소프트웨어 프로그램 및 장치는 저작권으로 보호되어 있습니다.
조립 및 작동 지침의 재인쇄는 부분적이라도 저작권 소유자의 서면 동의가 있는 경우에만 허용됩니다.
소프트웨어는 제조사 자체 장치의 장치 정보 및 유지보수 관리를 표시, 구성 및 분석하는 데 사용됩니다.
소프트웨어는 컴퓨터에서 제조사 자체 장치를 모니터링하는 데 사용됩니다.
소프트웨어에 다음과 같은 기능이 있습니다:메시지 및 오류 상황 실시간 수집, 분석, 신호 및 문서화
기술 데이터 및 물리적 크기 표시
유지보수 지원
기능 문서화
설정 조정
클라우드에 데이터 저장
치과 의사에 의해 명백한 동의를 거쳐 인터페이스를 통해 제3자(회사 또는 서비스 파트너)도 데이터에 접근할 수 있습니다.
소프트웨어는 아말감 분리기 모니터링을 위한 디스플레이 모듈의 기능을 보완합니다. 그러나 디스플레이 모듈을 대체하지는 않습니다.
위에서 기술한 용도 외 다른 사용은 부적절한 사용입니다. 제조회사에서는 이로 인해 발생한 손상에 대해서는 책임을 지지 않습니다. 이로 인한 위험에 대해서는 전적으로 사용자가 책임을 집니다.
소프트웨어 작동 시 사용 장소에 적용되는 지침, 법률, 조례 및 규정을 준수하십시오.
소프트웨어를 변경하지 마십시오.
설치 지침과 소프트웨어 설명서에 유의하십시오.
모든 사용자에게 본 소프트웨어의 취급에 대한 교육을 하거나 또는 교육을 받도록 하십시오.
이 소프트웨어는 로컬 IT 네트워크의 컴퓨터에 설치되어 클라우드 애플리케이션에 연결됩니다.
이에 따라 사이버 보안과 관련하여 제조업체와 운영자의 공동 책임인 보안 상황을 고려해야 합니다.
직원들에게 보안 및 데이터 보호에 대한 교육을 실시합니다.
데이터 보호 책임자를 임명합니다.
의료 IT 위험 관리자를 지정합니다.
의료 IT 네트워크의 보안 위험을 관리하기 위해 IEC 80001-1 표준을 적용할 것을 권장합니다.
의료 IT 네트워크 구성에는 네트워크 관리자의 전문 지식이 필요합니다.
의료 IT 네트워크의 다음과 같은 변경 사항은 새로운 보안 위험을 야기할 수 있으므로 위험 분석을 다시 평가해야 합니다.IT 네트워크 구성 변경
의료 IT 네트워크에 구성 요소(하드웨어 또는 소프트웨어) 추가
의료 IT 네트워크에서 구성 요소 제거
의료 IT 네트워크의 구성 요소 업데이트 또는 현대화
사이버 보안 사고가 발생한 경우
incidents@duerrdental.com을 통해 제조업체에 보고하십시오.운영자는 소프트웨어를 안전하게 사용하기 위해 다음과 같은 기술적 조치를 취해야 합니다.
방화벽과 바이러스 백신 소프트웨어로 의료 IT 네트워크를 보호합니다.
불필요하거나 안전하지 않은 서비스, 애플리케이션 및 네트워크 프로토콜을 비활성화합니다.
가능하면 유선 네트워크를 사용합니다.
바이러스 감염 예방을 위한 참조 사항에 유의하고, 필요한 경우 백신 소프트웨어로 검사하여 바이러스를 제거합니다.
사용하는 소프트웨어, 특히 운영 체제, 방화벽, 바이러스 백신 소프트웨어를 최신 상태로 유지합니다.
반드시 신뢰할 수 있는 콘텐츠만 다운로드하십시오. 제조업체가 인증한 소프트웨어 및 펌웨어 업데이트만을 설치합니다.
소프트웨어 또는 펌웨어의 무결성을 정기적으로 점검합니다.
각 설치 전에 시스템 요구 사항을 확인합니다.
적절한 경우 의료 IT 네트워크를 세분화합니다.
운영 체제 내에서 사용자 인증 및 권한을 사용합니다. 사용자 계정에 필요한 권한만을 할당합니다.
관리 역할을 매우 제한된 수의 계정으로 제한합니다.
소프트웨어 또는 의료 기기에서 제공하는 사용자 관리 기능을 사용합니다.
일반적으로 인정되는 비밀번호 요구 사항을 사용합니다.
개인 정보가 포함된 데이터는 암호화합니다.
정기적으로 데이터 백업을 수행합니다.
외부 저장 매채(예: USB 메모리, 메모리 카드)를 의료 IT 네트워크에 연결하기 전에 점검합니다.
인터넷 액세스를 최소한으로 제한합니다.
이메일과 첨부 파일에 의심스러운 악성 콘텐츠가 있는지 확인합니다.
무단 액세스로부터 하드웨어를 보호합니다(IT 네트워크, 서버 및 연결된 장치).
소프트웨어는 로컬 진료실 네트워크의 컴퓨터에 설치되어 있으며 진료실의 Dürr Dental 장치와 연결됩니다.
진료실의 장치에 메시지가 발생하면 소프트웨어는 메시지를 클라우드(vistasoftmonitor.com)로 전송합니다. 또한 VS Monitor 알림 메시지가 작업표시줄에 나타납니다.
브라우저를 통해 장치의 현재 상태와 예정된 유지보수를 볼 수 있습니다.
디바이스는 서비스 파트너에게 선택적으로 할당 가능합니다. 서비스 파트너는 할당된 기기 및 진료를 자동으로 수신합니다.

네트워크가 가능한 모든 호환 가능한 제조사 자체 장치를 소프트웨어에 연결할 수 있습니다.
지원되는 장치의 현재 개요는 www.duerrdental.com/en/vistasoftmonitor/를 참조하십시오.
네트워크 연결이 없는 장치는 Connect Box와 함께 소프트웨어에 연결할 수 있습니다.
진료실 네트워크의 서버 또는 컴퓨터에 VistaSoft Monitor 소프트웨어의 서버 설치를 위한 요구 사항:
운영체제: | Microsoft Windows 10 (버전 1809 이상) Microsoft Windows 11 Microsoft Windows Server 2019 Microsoft Windows Server 2022 Microsoft Windows Server 2025 |
그래픽 카드: | 해상도 ³ 1280 x 1024 (권장) |
인터페이스: | 이더넷, DHCP/IP 주소의 동적 할당 인터넷 |
필수 포트: | TCP: 502, 512, 514, 50123, 25565 UDP: 1900, 45123, 45124, 45125 |
추가로 필요한 소프트웨어: | 브라우저(Mozilla Firefox, Google Chrome 또는 Microsoft Edge 최신 버전) 이미지 플레이트 스캐너 연결: 동일한 컴퓨터에 VistaSoft 서버 또는 단일 사용자 설치(버전 3.0.20 이상) |
필수 주변장치: | 오디오 재생(사운드 카드, 스피커) 추천 |
클라우드의 사용자 인터페이스에는 브라우저만 필요합니다.
장치의 네트워크 연결은 LAN 또는 안정적인 WLAN을 통해 최대한 안정적이어야 합니다.
서버 소프트웨어가 로컬 네트워크의 컴퓨터에 설치됩니다. 이 컴퓨터는 클라우드에 대한 인터페이스로서 사용하며 인터넷 접근이 필요합니다.
서버 소프트웨어를 사용할 때 다음 사항에 유의하십시오:지속적으로 실행되는 컴퓨터에 서버 소프트웨어를 설치합니다.
권장: 진료 네트워크 서버. 불가능한 경우: 희망 컴퓨터(예: 수신 PC)
서버 소프트웨어를 네트워크의 한 컴퓨터에서만 실행하십시오
VistaSoft Monitor 와 호환되지 않습니다 Tyscor Pulse. Tyscor Pulse 설치 제거.
영상 소프트웨어 VistaSoft(버전 3.0.20 이상)가 서버와 동일한 컴퓨터에 설치되어 있어야 합니다.
VistaSoft를 처음 시작하면 VistaSoft Monitor가 자동으로 다운로드 및 설치됩니다. 인터넷에 연결되어 있지 않으면 나중에 소프트웨어를 다운로드하여 설치할 수 있습니다.
VistaSoft(버전 3.0.20부터)와 VistaSoft Monitor를 함께 설치한 경우, 진료 네트워크에 VistaSoft Monitor를 추가로 설치할 필요가 없습니다.
숙련된 전문가만 소프트웨어를 설치하고 사용할 수 있음.
일부 진료소에서는 프록시를 사용하여 인터넷 액세스를 제어합니다.
이 경우 VS Monitor 레거시 커넥터(LC)가 클라우드에 연결할 수 있도록 프록시 설정을 구성해야 합니다.
아이콘을 더블클릭하여 VS Monitor 알림을 다시 시작합니다.사용자가 VistaSoft Monitor 서버가 설치된 컴퓨터에 처음 로그인 시 네트워크에 있는 모든 장치가 해당 사용자에게 자동으로 할당됩니다.
그 후에 사용자는 장치를 모니터링하기 위해 사용자 인터페이스에 있는 임의의 최종 장치에서 로그인할 수 있습니다.
알림을 클릭합니다.또는시작 > Dürr Dental VS Monitor > VS Monitor 알림 을 클릭하십시오.사용자 계정을 확인하기 위해 활성화 링크가 이메일로 전송됩니다.
VistaSoft의 라이선싱 시 사용자 계정이 자동으로 생성되고, 활성화 링크가 있는 이메일이 전송됩니다.
클라우드 사용자 인터페이스가 브라우저에서 열립니다.
진료소:
VS Monitor 사용에 필요한 진료실 내 장치에 대한 액세스
서비스 파트너:
등록된 서비스 파트너로부터 진료실에 대한 선택적 액세스
진료소의 구성은 아래에 설명되어 있습니다.
서비스 파트너 관련 정보는 서비스 파트너를 위한 VistaSoft Monitor를 참조하십시오
VistaSoft Monitor 서버 설치된 로컬 네트워크의 컴퓨터
vistasoftmonitor.com의 사용자 계정(진료실 계정)(진료실 계정 등록 또한 참조).
을 클릭하십시오.또는시작 > Dürr Dental VS Monitor > VS Monitor 알림 을 클릭하십시오.VistaSoft Monitor 사용자 인터페이스가 브라우저에서 열립니다.
VistaSoft Monitor를 설정하려면 다음 단계가 필요합니다:
설치 시
의 메인 위치가 자동으로 생성됩니다.
메인 위치에 "Dr. Maier 치과"와 같이 설명이 포함된 이름을 지정하는 것을 추천합니다.
메인 위치는 더 많은 위치로 세분화할 수도 있습니다(위치 관리 참조). 이를 통해 대규모 조직에서도 다양한 위치의 디바이스에 대한 간단한 개요를 확인할 수 있습니다.
설정 을 클릭하십시오.대화 상자 창이 열립니다.
회원 VS 모니터에서 조직에 액세스 가능한 사용자입니다. 사용자는 메인 위치에 추가할 수 있습니다.
역할은 여러 가지이며 서로 다른 접근 권한을 갖습니다:
역할 | 접근 권한 |
|---|---|
회원 | 장치 정보 조회 |
관리자 | 위치 관리 구성원 관리 장치 관리 장치 매개변수 설정 |
설정 을 클릭하십시오.기존 위치가 표시됩니다.
새 회원은 사용자 인터페이스에 액세스할 수 있는 초대를 이메일로 받습니다.
을(를) 클릭하십시오.
역할 변경 을 클릭하십시오.
을(를) 클릭하십시오.
삭제 를 클릭하십시오.장치에 중요한 메시지(고장)가 발생하거나 유지 보수 작업이 예정된 경우 소프트웨어는 알림 에 입력된 연락처에 자동으로 알림을 보냅니다.
알림은 조직의 모든 수준에서 입력할 수 있습니다. 알림 연락처가 회색으로 표시되면 알림 연락처가 상위 수준 위치에 입력됩니다.
설정 을 클릭하십시오.기존 위치가 표시됩니다.
첫 번째 이메일이 전송됩니다. 이메일의 링크를 통해 VS Monitor 알림을 확인하십시오.
을(를) 클릭하십시오.
삭제 를 클릭하십시오.각 장치는 장치 목록에 자동으로 추가되고 처음에 메인 위치에 할당됩니다. 추가 위치가 생성되면 장치를 다른 위치에 할당할 수 있습니다.
장치 목록이 열립니다. 새 장치가 메인 위치에 할당됩니다.
모니터링 파트너는 각 장치에 지정할 수 있습니다. 모니터링 파트너는 장치 정보를 확인하고 설정할 수 있습니다.
서비스 파트너가 모니터링하는 디바이스는 대시보드의 디바이스 목록에서
로 표시됩니다.
모니터링 파트너에게 디바이스를 할당하기 전에 모니터링 파트너에게 문의하십시오. 모니터링 파트너는 수수료를 청구할 수 있습니다.
VS 모니터에 등록된 모니터링 파트너만 선택 가능합니다.
장치 세부 사항이 표시됩니다.
장치는 진료와 함께 서비스 파트너의 계정에 입력됩니다.
서비스 파트너는 받은
우편함으로 새 장치에 대한 알림을 받습니다.
아말감 분리기의 경우, WasteWatch 기능을 사용하여 아말감 수거 용기의 폐기 및 배송을 업체에 자동으로 의뢰할 수 있습니다.
아말감 수거 용기가 95%가 차서 교체해야 하는 경우 등록된 업체로 알림이 전송됩니다. 전송되는 알림에는 귀하의 연락처와 기본 장치 정보가 포함됩니다.
장치 세부 사항이 표시됩니다.
활성화 링크가 포함된 이메일이 회사로 전송됩니다. 회사는 30일 이내에 활성화 링크를 클릭하여 요청을 확인해야 합니다.
회사의 응답에 따라 상태가 표시됩니다:대기 중: 요청이 아직 확인되지 않았습니다.
등록: 회사에서 요청을 확인했습니다. 알림 기능이 활성화됩니다.
미등록: 회사에서 요청을 거절했습니다.
만료됨: 회사가 30일 이내에 응답하지 않았습니다.
다시 요청할 수 있습니다.
두 회사(처리업체와 공급업체) 모두 등록 상태가 될 때까지 WasteWatch는 비활성 상태로 표시됩니다.
두 회사 모두 등록 상태가 되면 WasteWatch 기능이 활성화되고 알림이 전송됩니다.
보기 및 권한은 역할(관리자 또는 회원)과 사용자(진료실 또는 서비스 파트너)에 따라 다릅니다.
서비스 파트너를 위한 VistaSoft Monitor도 참조하십시오.
알림은 소프트웨어가 설치된 로컬 네트워크의 컴퓨터에서 백그라운드로 VS Monitor 를 실행됩니다.
알림에는 두 가지 기능이 있습니다:컴퓨터에 데스크탑 알림을 표시합니다.
장치와 클라우드 간의 연결 설정
브라우저에서 사용자 인터페이스를 닫아도 컴퓨터의 소프트웨어가 종료되지 않습니다. 소프트웨어는 활성 상태로 유지되고 작업표시줄의 알림은 계속해서 상태를 표시합니다.
사용자 인터페이스를 다시 열려면 작업표시줄의 아이콘을 클릭하십시오.
작업 표시줄에 알림이 아이콘으로 표시됩니다.

디바이스에 새 메시지가 발생하면 VistaSoft Monitor는 해당 정보를 클라우드로 전송합니다. 작업 표시줄과 Windows 알림으로 새 메시지를 알립니다.
알림의 표시 시간은 Windows 설정을 통해 최대 5분까지 연장할 수 있습니다.
작업표시줄의 알림 프로그램 아이콘은 장치의 현재 최고 메시지 수준을 표시합니다.
![]() | 무고장 기능(메시지 없음) |
![]() | 고장 |
![]() | 주의 |
![]() | 알림 |
![]() | 장치와 연결 중단 |
작업 표시줄의 컨텍스트 메뉴(프로그램 아이콘에서 마우스 오른쪽 버튼)를 통해 알림을 닫거나 클라우드 연결을 끊을 수 있습니다:
데스크탑 알림 비활성화 | 데스크탑의 알림이 비활성화됩니다. 장치와 클라우드 간의 연결은 그대로 유지됩니다. 알림 통지도 참조 |
클라우드 연결 끊기 | 클라우드와의 연결이 끊겼습니다. 장치 정보와 메시지가 더 이상 클라우드로 전송되지 않음을 의미합니다. |
VS 모니터 열기 | 클라우드 사용자 인터페이스가 브라우저에서 열립니다. |
라이선스 | 추가 라이선스 조건이 표시됩니다. |
아이콘을 클릭하고 컨텍스트 메뉴에서 데스크탑 알림 비활성화 을 클릭하십시오.클라우드의 사용자 인터페이스가 열립니다.
알림이 클라우드에서 연결이 끊어지면 더 이상 장치 정보 및 알림이 클라우드로 전송되지 않습니다.
아이콘을 클릭하고 컨텍스트 메뉴에서 클라우드 연결 끊기 을 클릭하십시오.클라우드의 사용자 인터페이스가 열립니다.
사용자 인터페이스를 여는 방법에는 두 가지가 있습니다:

클라우드의 사용자 인터페이스는 검색 바와 콘텐츠 영역으로 구성됩니다.
콘텐츠 영역은 검색 바에서 선택한 보기에 따라 다릅니다.
로그인한 사용자의 역할에 따라 검색 바에서 다른 보기를 선택할 수 있습니다:
![]() | 대시보드 | 홈 페이지, 장치 및 위치의 상태 개요 유지 관리 영역은 유지 관리가 예정된 경우에만 표시됩니다. |
![]() | 받은 편지함 | 진료 팁:
|
![]() | 나의 장치 | 로컬 네트워크에 있는 모든 장치에 대한 정보. 장치가 고장, 주의 또는 참고 상태인 경우, 해당 장치의 수가 검색 바에 표시됩니다. 배경색은 발생한 가장 높은 메시지 수준을 나타냅니다. 나의 장치도 참조하십시오 |
![]() | 제품 검색 | 일련 번호, 주문 번호 또는 제품명으로 Dürr Dental의 제품 정보를 검색합니다. 앱을 사용하여 검색을 위해 유형판을 쉽게 스캔할 수도 있습니다. |
![]() | 저장된 문서 | 즐겨찾기로 표시된 문서 |
![]() | 제품 등록 2+1 | 보증 연장을 신청하려면 새 장치를 Dürr Dental에 등록하십시오. |
![]() | 설정 | 위치, 사용자, 알림 생성 및 편집 |
클라우드에 처음 로그인하면 브라우저에서 이 웹사이트의 알림을 수락하도록 설정 가능합니다. 설정이 완료되면 컴퓨터에서 브라우저가 열려 있을 때 VS 모니터의 데스크톱 알림이 표시됩니다. 이를 위해 VS 모니터 웹사이트가 열려 있지 않아도 됩니다.
알림은 브라우저 설정을 통해 언제든지 활성화/비활성화할 수 있습니다.
나의 장치에 소프트웨어와 연결되어 있는 장치가 모두 표시됩니다.
장치 상태는 장치 목록의 아이콘으로 인식할 수 있습니다:
![]() | 무고장 기능 |
![]() | 고장 장치 기능 중단 |
![]() | 주의 장치 기능 제한 |
![]() | 장치 오프라인 장치와 연결 중단, 장치 상태에 대한 현재 정보 없음, 예를 들면 장치가 꺼져 있거나 네트워크와 연결되지 않음 |
자세한 내용은 장치 목록에서 확인할 수 있습니다:
![]() | 서비스 파트너별 장치 모니터링 활성화 |
![]() | 유지보수 작업 기한은 유지보수를 참고하십시오 |
나의 장치를 클릭하십시오.
검색 필드에서 제품명, 시리얼 번호(SN), 주문 번호(REF) 또는 카테고리를 입력하십시오. 
장치의 기본 정보에 제품 이름, 주문 번호, 장치의 시리얼 번호 및 마지막 온라인 접속 시점과 같은 장치 상태가 표시됩니다.
탭을 통해 다음 정보를 불러낼 수 있습니다:
대시보드 | 기본 정보 표시 및 장치의 현재 상태에 대한 개요 |
메시지 | 장치의 모든 메시지를 조회할 수 있습니다. 메시지는 시간순으로 정렬되어 있습니다. 목록에서 코드와 메시지를 찾을 수 있습니다. |
문서 | durrdental.com의 다운로드 센터에서 사용 가능한 지침 및 추가 정보(서비스 파트너를 위한 추가 durrdental.net) |
서비스 파트너 | 장치의 서비스 파트너를 저장할 수 있습니다. |
매개변수 | 조회하거나 설정할 수 있는 장치의 매개변수(사용자 역할에 따라 다름, 예: 관리자) |
유지보수 | 기한과 필요한 예비 부품을 명시한 유지 보수 작업 목록 |
장치 추가 설정은 더보기 버튼을 통해 가능합니다.
제품 등록 2+1 | 보증 연장을 신청하려면 이 장치를 Dürr Dental 에 등록하십시오 |
설정 | 장치의 위치를 설정하십시오 |
장치 제거 장치가 네트워크에 다시 연결되면 장치가 장치 목록에 자동으로 다시 추가됩니다. |
이미지 플레이트 스캐너는 단순 장치 데이터(예: 메시지, 유지보수 정보)만 VS 모니터에 전송합니다. 이미지 데이터나 환자 데이터는 전송되지 않습니다.
이미지 플레이트 스캐너를 사용하거나 촬영 매개변수를 설정하려면 영상 소프트웨어가 필요합니다.
대시보드 은 장치의 현재 상태에 대한 개요를 제공합니다
또한 기본 정보가 여기에 표시됩니다, 예: B. 주문번호, 일련번호, 펌웨어 버전, 보증서.
장치에 따라 현재 장치 매개변수와 다음 유지보수까지의 시간이 제공됩니다.
세부 사항 보기 메시지는 장치의 발생한 메시지를 보여줍니다. 이 때 메시지는 다음과 같은 카테고리로 나뉘어짐:
![]() | 고장 예를 들면 컴프레서 장치 고장 |
![]() | 주의 예를 들면 아말감 용기 95% 가득 참 |
![]() | 알림 예를 들면 필터 변경 필요 |
![]() | 정보 예를 들면 다음 유지관리 날짜는 30일 후 |
장치에 고장 또는 주의 카테고리의 메시지가 발생하면 클라우드 기반 사용자 인터페이스에서
나의 장치 아래에 메시지가 나타납니다. 장치 목록에서 아이콘이 변경됩니다.
알림은 말풍선 팁과 함께 표시되고 작업표시줄의 아이콘은 메시지 수준의 색상으로 보완됩니다(예:
). 여러 메시지가 발생하면 가장 높은 메시지 수준의 색상이 표시됩니다.
장치에 이용 가능한 추가 정보(예: PDF 설명서 또는 동영상)는 세부 영역의 문서 아래에 나열되어 있습니다.
서비스 파트너의 경우 이 장치에서도 사용 가능한 모든 문서가 duerrdental.net 포털에 표시됩니다.
문서가 자주 필요할 경우 검색 바의 저장된 문서
에 추가할 수 있습니다.
을(를) 클릭하십시오.
을(를) 클릭하십시오.레지스터 카드 매개변수에서 장치의 설정된 매개변수를 조회할 수 있습니다. 사용자가 필요한 권한을 가지고 있으면 장치의 매개변수를 변경할 수 있습니다.
진단 기기의 경우, 매개변수는 장치에서 직접 또는 이미징 소프트웨어를 통해서만 변경할 수 있습니다.
변경 사항이 장치로 전송됩니다. 장치의 매개변수가 변경되는 즉시 소프트웨어에 메시지가 나타납니다.
장치에서 변경이 완료되지 않는 한 소프트웨어에서 추가 변경이 불가능합니다.
정기 유지보수 작업은 유지보수 탭에 표시됩니다.
유지 관리가 기한이 되면 유지 보수 탭이
강조 표시됩니다. 이메일도 전송됩니다 ( 알림을 위한 연락처 입력참조).
유지 보수 작업은 기한별로 그룹화되어 열고 닫을 수 있습니다.
예비 부품 표시 를 클릭하면 유지 관리 작업에 필요한 예비 부품 목록이 표시됩니다.
유지보수 작업이 실행된 경우 관리자 또는 기술자가 이를 확인할 수 있습니다.
나의 장치에서 장치를 선택하고 유지보수 탭으로 이동하십시오.
을 클릭하십시오. 대화 상자 창이 닫힙니다. 유지보수 주기가 리셋됩니다.
장치 히스토리에 수행된 유지보수 작업이 표시됩니다.
나의 장치에서 장치를 선택하고 유지보수 탭으로 이동하십시오.장치 히스토리가 열립니다.
법적인 이유로 멸균 매개변수는 VS 모니터가 아닌 장치에서 직접 설정할 수 있습니다.
연결된 Hygoclave 50의 경우, 장치의 모든 신규 및 기존 멸균 프로토콜이 로컬 네트워크에서 서버 설치를 사용할 수 있는 컴퓨터에 자동으로 로컬로 저장됩니다.
멸균 프로토콜은 장치(일련 번호)별로 다음 디렉터리에 저장됩니다:
C:\Documents\Dürr Dental\[일련번호]\[연도]\[월]
로그인한 사용자의 정보 및 설정은 검색 바 하단 가장자리에 있습니다.
로그인한 사용자를 클릭하면 다양한 기능이 있는 컨텍스트 메뉴가 열립니다.
![]() | 내 사용자 계정:
|
![]() | 언어 변경 |
![]() | 도움말 열기 |
![]() | 법적 고지 이용 약관 열기 |
![]() | 개인정보 보호 정책 열기 |
![]() | 사용자 로그아웃 |
VS 모니터는 서비스 파트너에게 다양한 진료를 위해 할당된 장치 상태에 대한 개요를 제공합니다.
클라우드 기반 사용자 인터페이스를 통해 예정된 유지보수 작업을 불러올 수도 있습니다.
서비스 파트너는 Dürr Dental 에 등록해야 합니다.

클라우드의 사용자 인터페이스는 검색 바와 콘텐츠 영역으로 구성됩니다.
콘텐츠 영역은 검색 바에서 선택한 보기에 따라 다릅니다.
로그인한 사용자의 역할에 따라 검색 바에서 다른 보기를 선택할 수 있습니다:
![]() | 대시보드 | 홈 페이지, 장치 및 위치의 상태 개요 유지 관리 영역은 유지 관리가 예정된 경우에만 표시됩니다. |
![]() | 받은 편지함 | 서비스 파트너를 위한 참고 사항:
|
![]() | 기술 소식 | Dürr Dental의 최신 정보 |
![]() | 나의 장치 | 로컬 네트워크에 있는 모든 장치에 대한 정보. 장치가 고장, 주의 또는 참고 상태인 경우, 해당 장치의 수가 검색 바에 표시됩니다. 배경색은 발생한 가장 높은 메시지 수준을 나타냅니다. 나의 장치도 참조하십시오 |
![]() | 제품 검색 | 일련 번호, 주문 번호 또는 제품명으로 Dürr Dental의 제품 정보를 검색합니다. 앱을 사용하여 검색을 위해 유형판을 쉽게 스캔할 수도 있습니다. |
![]() | 저장된 문서 | 즐겨찾기로 표시된 문서 |
![]() | 제품 등록 2+1 | 보증 연장을 신청하려면 새 장치를 Dürr Dental에 등록하십시오. |
![]() | 예비 부품 카탈로그 | Dürr Dental 예비 부품 카탈로그 링크, 새 브라우저 창에서 열림 |
![]() | 설정 | 위치, 사용자, 알림 생성 및 편집 |
클라우드에 처음 로그인하면 브라우저에서 이 웹사이트의 알림을 수락하도록 설정 가능합니다. 설정이 완료되면 컴퓨터에서 브라우저가 열려 있을 때 VS 모니터의 데스크톱 알림이 표시됩니다. 이를 위해 VS 모니터 웹사이트가 열려 있지 않아도 됩니다.
알림은 브라우저 설정을 통해 언제든지 활성화/비활성화할 수 있습니다.
조직 구조에는 다양한 유형의 위치가 있습니다:
![]() | 메인 위치 자동으로 생성된 위치. 편집하고 이름을 변경할 수 있지만 삭제할 수 없습니다. 회원(사용자)은 여기에서 관리됩니다(회원 관리 참조). |
![]() | 지역 위치 그룹에 대한 주소가 없는 위치 |
![]() | 주소가 있는 위치 하나 이상 위치에서 주소를 입력하면 지도에서 위치가 |
서비스 파트너는 자동으로
메인 위치를 갖게 됩니다.
진료실에서 서비스 파트너에게 기기를 할당하고 서비스 파트너가 이를 확인한 경우, 진료실은 서비스 파트너의 조직에서
위치로 표시됩니다.
더 나은 개요를 위해 위치를
지역과
위치로 요약할 수 있습니다. 각 위치에 대해 개별 알림을 설정할 수 있습니다(알림을 위한 연락처 입력 참조).
조직 구조의 예시입니다:
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
설정 을 클릭하십시오.기존 위치가 표시됩니다.
대화 상자 창이 열립니다.
이름을 하나만 입력하면
지역이 생성됩니다.
주소는
위치를 생성하는 데 사용됩니다.
대화 상자 창이 열립니다.
할당된 장치 또는 하위 위치가 없는 경우에만 위치를 삭제할 수 있습니다. 할당된 모든 장치와 위치는 삭제하기 전에 제거해야 합니다.
상위 메인 위치를 삭제할 수 없습니다.
대화 상자 창이 열립니다.
을(를) 클릭하십시오.회원 VS 모니터에서 조직에 액세스 가능한 사용자입니다. 사용자는 메인 위치에 추가할 수 있습니다.
역할은 여러 가지이며 서로 다른 접근 권한을 갖습니다:
역할 | 접근 권한 |
|---|---|
회원 | 장치 정보 조회 |
관리자 | 위치 관리 회원 관리 장치 관리 장치 매개변수 설정 |
기술자 | 장치 매개변수 설정(확장됨) |
설정 을 클릭하십시오.기존 위치가 표시됩니다.
새 회원은 사용자 인터페이스에 액세스할 수 있는 초대를 이메일로 받습니다.
을(를) 클릭하십시오.
역할 변경 을 클릭하십시오.
을(를) 클릭하십시오.
삭제 를 클릭하십시오.장치에 중요한 메시지(고장)가 발생하거나 유지 보수 작업이 예정된 경우 소프트웨어는 알림 에 입력된 연락처에 자동으로 알림을 보냅니다.
알림은 조직의 모든 수준에서 입력할 수 있습니다. 알림 연락처가 회색으로 표시되면 알림 연락처가 상위 수준 위치에 입력됩니다.
설정 을 클릭하십시오.기존 위치가 표시됩니다.
첫 번째 이메일이 전송됩니다. 이메일의 링크를 통해 VS Monitor 알림을 확인하십시오.
을(를) 클릭하십시오.
삭제 를 클릭하십시오.
장치의 기본 정보에 제품 이름, 주문 번호, 장치의 시리얼 번호 및 마지막 온라인 접속 시점과 같은 장치 상태가 표시됩니다.
탭을 통해 다음 정보를 불러낼 수 있습니다:
대시보드 | 기본 정보 표시 및 장치의 현재 상태에 대한 개요(대시보드 참조) |
메시지 | 장치의 모든 메시지를 조회할 수 있습니다(현재 메시지 조회 참조). 메시지는 시간순으로 정렬되어 있습니다. 목록에서 코드와 메시지를 찾을 수 있습니다. |
문서 | 다운로드 센터에서 제공되는 지침 및 추가 정보는 duerrdental.com 및 duerrdental.net에서 확인할 수 있습니다(장치 문서 보기 참조) |
매개변수 | 조회하거나 설정할 수 있는 장치의 매개변수(사용자 역할에 따라 다름, 예: 관리자)(장치 매개변수 설정 참조) |
유지보수 | 기한과 필요한 예비 부품을 명시한 유지 보수 작업 목록(유지보수 참조) |
장치 추가 설정은 더보기 버튼을 통해 가능합니다.
제품 등록 2+1 | 보증 연장을 신청하려면 이 장치를 Dürr Dental 에 등록하십시오 |
예비 부품 카탈로그 | 예비 부품 카탈로그의 장치 예비 부품 링크 |
설정 | 장치 제거 장치가 네트워크에 다시 연결되면 장치가 장치 목록에 자동으로 다시 추가됩니다. |
일반적인 정비 이상의 작업이 필요한 수리 작업은 유자격 전문가나 당사의 고객 서비스 팀만이 실행해야 하는 작업입니다.
오류 | 가능한 원인 | 해결 |
|---|---|---|
장치가 장치 목록에 표시되지 않습니다 | 장치가 네트워크에 연결되지 않습니다 |
|
방화벽 설정이 정확하지 않습니다 |
| |
제어판에서 잘못된 네트워크 설정 |
| |
장치의 이전 펌웨어가 지원되지 않습니다 | 장치가 다음을 지원하는 경우:
| |
사용자가 VS Monitor에서 알림을 통해 로그인하지 않았습니다. |
| |
잘못된 네트워크 구성 |
| |
장치 상태가 업데이트되지 않고 메시지가 표시되지 않습니다 | 장치와 연결 중단 |
|
컴퓨터(서버 설치)에서 VistaSoft Monitor 서비스가 중단되었습니다 |
| |
인터넷 연결 중단 |
| |
사용자가 VistaSoft Monitor에서 알림을 통해 로그인하지 않습니다. |
| |
장치 대시보드에 표시되는 정보가 제한됨 | 장치 펌웨어 버전이 오래됨 |
|
VS 모니터에 이미지 플레이트 스캐너의 상태 표시 없음 | VS 모니터와 VistaSoft가 동일한 컴퓨터에 설치되어 있지 않거나 버전이 잘못되었습니다 |
|
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS” AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Mozilla Public License
Version 2.0
This license applies to the following redistributed libraries and files:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
1. Definitions
1.1. “Contributor”means each individual or legal entity that creates, contributes to the creation of, or owns Covered Software.
1.2. “Contributor Version”means the combination of the Contributions of others (if any) used by a Contributor and that particular Contributor’s Contribution.
1.3. “Contribution”means Covered Software of a particular Contributor.
1.4. “Covered Software”means Source Code Form to which the initial Contributor has attached the notice in Exhibit A, the Executable Form of such Source Code Form, and Modifications of such Source Code Form, in each case including portions thereof.
1.5. “Incompatible With Secondary Licenses”meansthat the initial Contributor has attached the notice described in Exhibit B to the Covered Software; orthat the Covered Software was made available under the terms of version 1.1 or earlier of the License, but not also under the terms of a Secondary License.
1.6. “Executable Form”means any form of the work other than Source Code Form.
1.7. “Larger Work”means a work that combines Covered Software with other material, in a separate file or files, that is not Covered Software.
1.8. “License”means this document.
1.9. “Licensable”means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently, any and all of the rights conveyed by this License.
1.10. “Modifications”means any of the following:any file in Source Code Form that results from an addition to, deletion from, or modification of the contents of Covered Software; orany new file in Source Code Form that contains any Covered Software.
1.11. “Patent Claims” of a Contributormeans any patent claim(s), including without limitation, method, process, and apparatus claims, in any patent Licensable by such Contributor that would be infringed, but for the grant of the License, by the making, using, selling, offering for sale, having made, import, or transfer of either its Contributions or its Contributor Version.
1.12. “Secondary License”means either the GNU General Public License, Version 2.0, the GNU Lesser General Public License, Version 2.1, the GNU Affero General Public License, Version 3.0, or any later versions of those licenses.
1.13. “Source Code Form”means the form of the work preferred for making modifications.
1.14. “You” (or “Your”)means an individual or a legal entity exercising rights under this License. For legal entities, “You” includes any entity that controls, is controlled by, or is under common control with You. For purposes of this definition, “control” means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
2. License Grants and Conditions
2.1. Grants
Each Contributor hereby grants You a world-wide, royalty-free, non-exclusive license:
1. under intellectual property rights (other than patent or trademark) Licensable by such Contributor to use, reproduce, make available, modify, display, perform, distribute, and otherwise exploit its Contributions, either on an unmodified basis, with Modifications, or as part of a Larger Work; and
2. under Patent Claims of such Contributor to make, use, sell, offer for sale, have made, import, and otherwise transfer either its Contributions or its Contributor Version.
2.2. Effective Date
The licenses granted in Section 2.1 with respect to any Contribution become effective for each Contribution on the date the Contributor first distributes such Contribution.
2.3. Limitations on Grant Scope
The licenses granted in this Section 2 are the only rights granted under this License. No additional rights or licenses will be implied from the distribution or licensing of Covered Software under this License. Notwithstanding Section 2.1(b) above, no patent license is granted by a Contributor:
1. for any code that a Contributor has removed from Covered Software; or
2. for infringements caused by: (i) Your and any other third party’s modifications of Covered Software, or (ii) the combination of its Contributions with other software (except as part of its Contributor Version); or
3. under Patent Claims infringed by Covered Software in the absence of its Contributions.
This License does not grant any rights in the trademarks, service marks, or logos of any Contributor (except as may be necessary to comply with the notice requirements in Section 3.4).
2.4. Subsequent Licenses
No Contributor makes additional grants as a result of Your choice to distribute the Covered Software under a subsequent version of this License (see Section 10.2) or under the terms of a Secondary License (if permitted under the terms of Section 3.3).
2.5. Representation
Each Contributor represents that the Contributor believes its Contributions are its original creation(s) or it has sufficient rights to grant the rights to its Contributions conveyed by this License.
2.6. Fair Use
This License is not intended to limit any rights You have under applicable copyright doctrines of fair use, fair dealing, or other equivalents.
2.7. Conditions
Sections 3.1, 3.2, 3.3, and 3.4 are conditions of the licenses granted in Section 2.1.
3. Responsibilities
3.1. Distribution of Source Form
All distribution of Covered Software in Source Code Form, including any Modifications that You create or to which You contribute, must be under the terms of this License. You must inform recipients that the Source Code Form of the Covered Software is governed by the terms of this License, and how they can obtain a copy of this License. You may not attempt to alter or restrict the recipients’ rights in the Source Code Form.
3.2. Distribution of Executable Form
If You distribute Covered Software in Executable Form then:
1. such Covered Software must also be made available in Source Code Form, as described in Section 3.1, and You must inform recipients of the Executable Form how they can obtain a copy of such Source Code Form by reasonable means in a timely manner, at a charge no more than the cost of distribution to the recipient; and
2. You may distribute such Executable Form under the terms of this License, or sublicense it under different terms, provided that the license for the Executable Form does not attempt to limit or alter the recipients’ rights in the Source Code Form under this License.
3.3. Distribution of a Larger Work
You may create and distribute a Larger Work under terms of Your choice, provided that You also comply with the requirements of this License for the Covered Software. If the Larger Work is a combination of Covered Software with a work governed by one or more Secondary Licenses, and the Covered Software is not Incompatible With Secondary Licenses, this License permits You to additionally distribute such Covered Software under the terms of such Secondary License(s), so that the recipient of the Larger Work may, at their option, further distribute the Covered Software under the terms of either this License or such Secondary License(s).
3.4. Notices
You may not remove or alter the substance of any license notices (including copyright notices, patent notices, disclaimers of warranty, or limitations of liability) contained within the Source Code Form of the Covered Software, except that You may alter any license notices to the extent required to remedy known factual inaccuracies.
3.5. Application of Additional Terms
You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Software. However, You may do so only on Your own behalf, and not on behalf of any Contributor. You must make it absolutely clear that any such warranty, support, indemnity, or liability obligation is offered by You alone, and You hereby agree to indemnify every Contributor for any liability incurred by such Contributor as a result of warranty, support, indemnity or liability terms You offer. You may include additional disclaimers of warranty and limitations of liability specific to any jurisdiction.
4. Inability to Comply Due to Statute or Regulation
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Software due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be placed in a text file included with all distributions of the Covered Software under this License. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it.
5. Termination
5.1. The rights granted under this License will terminate automatically if You fail to comply with any of its terms. However, if You become compliant, then the rights granted under this License from a particular Contributor are reinstated (a) provisionally, unless and until such Contributor explicitly and finally terminates Your grants, and (b) on an ongoing basis, if such Contributor fails to notify You of the non-compliance by some reasonable means prior to 60 days after You have come back into compliance. Moreover, Your grants from a particular Contributor are reinstated on an ongoing basis if such Contributor notifies You of the non-compliance by some reasonable means, this is the first time You have received notice of non-compliance with this License from such Contributor, and You become compliant prior to 30 days after Your receipt of the notice.
5.2. If You initiate litigation against any entity by asserting a patent infringement claim (excluding declaratory judgment actions, counter-claims, and cross-claims) alleging that a Contributor Version directly or indirectly infringes any patent, then the rights granted to You by any and all Contributors for the Covered Software under Section 2.1 of this License shall terminate.
5.3. In the event of termination under Sections 5.1 or 5.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or Your distributors under this License prior to termination shall survive termination.
6. Disclaimer of Warranty
Covered Software is provided under this License on an “as is” basis, without warranty of any kind, either expressed, implied, or statutory, including, without limitation, warranties that the Covered Software is free of defects, merchantable, fit for a particular purpose or non-infringing. The entire risk as to the quality and performance of the Covered Software is with You. Should any Covered Software prove defective in any respect, You (not any Contributor) assume the cost of any necessary servicing, repair, or correction. This disclaimer of warranty constitutes an essential part of this License. No use of any Covered Software is authorized under this License except under this disclaimer.
7. Limitation of Liability
Under no circumstances and under no legal theory, whether tort (including negligence), contract, or otherwise, shall any Contributor, or anyone who distributes Covered Software as permitted above, be liable to You for any direct, indirect, special, incidental, or consequential damages of any character including, without limitation, damages for lost profits, loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses, even if such party shall have been informed of the possibility of such damages. This limitation of liability shall not apply to liability for death or personal injury resulting from such party’s negligence to the extent applicable law prohibits such limitation. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion and limitation may not apply to You.
8. Litigation
Any litigation relating to this License may be brought only in the courts of a jurisdiction where the defendant maintains its principal place of business and such litigation shall be governed by laws of that jurisdiction, without reference to its conflict-of-law provisions. Nothing in this Section shall prevent a party’s ability to bring cross-claims or counter-claims.
9. Miscellaneous
This License represents the complete agreement concerning the subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not be used to construe this License against a Contributor.
10. Versions of the License
10.1. New Versions
Mozilla Foundation is the license steward. Except as provided in Section 10.3, no one other than the license steward has the right to modify or publish new versions of this License. Each version will be given a distinguishing version number.
10.2. Effect of New Versions
You may distribute the Covered Software under the terms of the version of the License under which You originally received the Covered Software, or under the terms of any subsequent version published by the license steward.
10.3. Modified Versions
If you create software not governed by this License, and you want to create a new license for such software, you may create and use a modified version of this License if you rename the license and remove any references to the name of the license steward (except to note that such modified license differs from this License).
10.4. Distributing Source Code Form that is Incompatible With Secondary Licenses
If You choose to distribute Source Code Form that is Incompatible With Secondary Licenses under the terms of this version of the License, the notice described in Exhibit B of this License must be attached.
Exhibit A - Source Code Form License Notice
This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0. If a copy of the MPL was not distributed with this file, You can obtain one at https://mozilla.org/MPL/2.0/.
If it is not possible or desirable to put the notice in a particular file, then You may include the notice in a location (such as a LICENSE file in a relevant directory) where a recipient would be likely to look for such a notice.
![]() |
Hersteller / Manufacturer: |
DÜRR DENTAL SE Höpfigheimer Str. 17 74321 Bietigheim-Bissingen Germany Fon: +49 7142 705-0 www.duerrdental.com info@duerrdental.com |